Razlika između verzija stranice "Ležaj"

S Wikipedije, slobodne enciklopedije
[nepregledana izmjena][nepregledana izmjena]
Uklonjeni sadržaj Dodani sadržaj
Thijs!bot (razgovor | doprinosi)
m robot Dodaje: lt:Guolis (mechanika)
m vaj ju dont vorking on dis artikl kolega?
Red 1: Red 1:
{{Prijevod}}
{{Prijevod}}
{{Izmjena_u_toku}}
'''Ležaj''' je sprava koja dozvoljava određeno relativno kretanje između dva dijela, najčešće rotaciju ili linearno pomijeranje. Ležaji se mogu klasificirati prema kretanjima koja dozvoljavaju, te prema principu njihovog funkcionisanja.
'''Ležaj''' je sprava koja dozvoljava određeno relativno kretanje između dva dijela, najčešće rotaciju ili linearno pomijeranje. Ležaji se mogu klasificirati prema kretanjima koja dozvoljavaju, te prema principu njihovog funkcionisanja.
[[Slika:Four-point-contact-bearing din628 type-qj 120-ex.png|thumb|300px|Primjer kugličnog ležaja]]
[[Slika:Four-point-contact-bearing din628 type-qj 120-ex.png|thumb|300px|Primjer kugličnog ležaja]]

Verzija na dan 25 juli 2008 u 10:40

Ležaj je sprava koja dozvoljava određeno relativno kretanje između dva dijela, najčešće rotaciju ili linearno pomijeranje. Ležaji se mogu klasificirati prema kretanjima koja dozvoljavaju, te prema principu njihovog funkcionisanja.

Primjer kugličnog ležaja

Glavni tipovi

Common motions include linear/axial and rotary/radial. A linear bearing allows motion along a straight line, for example a drawer being pulled out and pushed in. A rotary bearing or thrust bearing allows motion about a center, such as a wheel on an axle or a spindle through a housing. Common kinds of rotary motion include both one-direction rotation and oscillation where the motion only goes through part of a revolution, such as with a hinge. Other kinds of bearings include spherical bearings such as ball joints which are used in car suspensions and some computer mice.

Trenje u ležajima

Low friction bearings are often important for efficiency, to reduce wear and to facilitate high speeds. Essentially, a bearing can reduce friction by virtue of its shape, by its material, or by introducing and containing a fluid between surfaces.

  • By shape, gains advantage usually by using spheres or rollers.
  • By material, exploits the nature of the bearing material used. (An example would be using plastics that have low surface friction.)
  • By fluid, exploits the low viscosity of a layer of fluid, such as a lubricant or as a pressurised medium to keep the two solid parts from touching.
  • By fields, exploits electromagnetic fields, such as magnetic fields, to keep solid parts from touching.

Combinations of these, can even be employed with the same bearing. An example of this is where the cage is made of plastic, and it separates the rollers/balls, which reduce friction by their shape and finish.

Principi funkcionisanja

Animacija kugličnog ležaja

Postoji najmanje šest principa rada ležaja:

Nošenje opterećenja i performanse ležaja

Bearings vary greatly over the forces and speeds that they can support.

Forces can be radial, axial (thrust bearings) or moments perpendicular to the main axis.

The maximum speeds that rotational bearings can support also vary, generally performance is defined in terms of the product 'DN' where D is the diameter (often in mm) of the bearing and N is the rotation rate in revolutions per minute.

Historija i razvoj

An early type of linear bearing was an arrangement of tree trunks laid down under sleds. This technology may date as far back as the construction of the Pyramids of Giza, though there is no definitive evidence. Modern linear bearings use a similar principle, sometimes with balls in place of rollers.

The first plain and rolling-element bearings were wood, but ceramic, sapphire or glass can be used, and steel, bronze, other metals, and plastic (e.g., nylon, polyoxymethylene, teflon, and UHMWPE) are all common today. Indeed, stone was even used in various forms. Think of the "jeweled pocket watch", which incorporated stones to reduce frictional loads, and allow a smoother running watch. Of course, with older, mechanical timepieces, the smoother the operating properties, then the higher the accuracy and value. Wooden bearings can still be seen today in old water mills where the water has implications for cooling and lubrication.

Rotary bearings are required for many applications, from heavy-duty use in vehicle axles and machine shafts, to precision clock parts. The simplest rotary bearing is the sleeve bearing, which is just a cylinder inserted between the wheel and its axle. This was followed by the roller bearing, in which the sleeve was replaced by a number of cylindrical rollers. Each roller behaves as an individual wheel. The first practical caged-roller bearing was invented in the mid-1740s by horologist John Harrison for his H3 marine timekeeper. This used the bearing for a very limited oscillating motion but Harrison also used a similar bearing in a truly rotary application in a contemporaneous regulator clock.

An early example of a wooden ball bearing (see rolling-element bearing), supporting a rotating table, was retrieved from the remains of the Roman Nemi ships in Lake Nemi, Italy. The wrecks were dated to 40 AD. Leonardo da Vinci is said to have described a type of ball bearing around the year 1500. One of the issues with ball bearings is that they can rub against each other, causing additional friction, but this can be prevented by enclosing the balls in a cage. The captured, or caged, ball bearing was originally described by Galileo in the 1600s. The mounting of bearings into a set was not accomplished for many years after that. The first patent for a ball race was by Philip Vaughan of Carmarthen in 1794.

Friedrich Fischer's idea from the year 1883 for milling and grinding balls of equal size and exact roundness by means of a suitable production machine formed the foundation for creation of an independent bearing industry.

Tapered steering head bearings for a motorcycle

The modern, self-aligning design of ball bearing is attributed to Sven Wingquist of the SKF ball-bearing manufacturer in 1907.

Henry Timken, a 19th century visionary and innovator in carriage manufacturing, patented the tapered roller bearing, in 1898. The following year, he formed a company to produce his innovation. Through a century, the company grew to make bearings of all types, specialty steel and an array of related products and services.

The Timken Company (Sale $4,973.4M, 2006), The SKF company($6,195.1M, 2005), the Schaeffler Group (Private), the NSK company($5,344.5M, 2006), and the NTN Bearing company($3,697.8M, 2006) are now the largest bearing manufacturers in the world.

Također pogledajte

Vanjski linkovi